
How to Install Ghost Immobiliser
So you’re interested in getting some additional security in your vehicle, and you’ve decided to go for the Ghost Immobiliser, so what’s the next step
The Autowatch Ghost Immobiliser protects your car from key-cloning, hacking, and car theft.
The Autowatch Ghost 2 Immobiliser uses the buttons in your vehicle, such as those on the steering wheel, to allow you to make a unique, changeable, disarm sequence (like a PIN code) that must first be entered before you can drive your car. Only those who know the combination have the ability to start the vehicle using the key.
The new TASSA approved Autowatch Ghost 2 Immobiliser systems also include a special vehicle marking system used by insurance companies across Europe linking it to the International Security Register.
Protect your vehicle from theft like nothing else on the market, supplied and fitted from £500.
Protecting you from key cloning, hacking & car theft combined with live tracking
Protecting you from key cloning, hacking & car theft combined with live tracking & 24/7 theft monitoring
The Autowatch Ghost Immobiliser is one of the most fool proof aftermarket security solutions available. For those who want optimum security, look no further than this.
The Ghost Immobiliser is a security device installed into your vehicle, and if done properly it will be impossible to find, this stops thieves from trying to damage or remove the vehicle security device.
It works by requiring a ‘password’ in order for the engine to start, this password comes in the form of pressing a combination of buttons in a specific order, this disables the security system, allowing the engine to start.
The combination is decided by yourself and can be changed at a later time if you so choose.
If the code is wrong or not entered, the vehicle will simply not start. This restricts criminals from access to your vehicle, only available to those who know the code – which generally, should just be you.
Operating your vehicle with the ghost immobiliser active is as simple as:
As a TASSA approved security system, the ghost immobiliser should help to lower your insurance premiums. (it is best to double-check with them directly).
The Ghost Immobiliser can not be detected by diagnostics. Nobody but the installer and yourself will know that you have it and where it is.
This system can not be bypassed by any methods employed by a thief. Only entering the correct code will allow the vehicle to start.
Unfortunately, cars with keyless entry are vulnerable to being stolen in under 60 seconds.
Keyless car theft is the most common way cars are stolen, thieves do this by using keyless cloning and relay methods. This is done by picking up the transmission of your original key and replicating it to gain access to your car.
The Ghost Immobiliser eliminates this as an option, as even with the key present unless you know the unique pin code, the vehicle will not move or start.
Since March 2020, the Autowatch Ghost II Immobiliser is TASSA approved and recognised by some insurers.
Most insurers are adding the Autowatch Ghost 2 to their lists regularly so it is always best to contact them to verify whether they will reduce your insurance premium.
The Auto watch Ghost II Immobiliser will prevent the starting of the engine unless the unique, user defined PIN code has been entered first.
A thief can not use diagnostics machines or tools to detect the Auto watch Ghost II Immobiliser.
Thieves cannot use sophisticated RF scanning, code grabbing technology to detect what security device your vehicle has when it does not transmit any signals like conventional security systems.
The use of the CAN data bus has several advantages including low risk during installation, low probability of detection, and allows for placement almost anywhere in the vehicle.
Because the unit communicates with the ECU on the data bus to immobilise the vehicle there is no way a thief could listen for the tell-tale clicking of a traditional immobiliser relay.
A thief cannot simply add a new key or replace an ECU to bypass the Autowatch Ghost II Immobiliser and start the vehicle. Only a correct PIN code will allow the engine to start.
Due to the nature of the data bus communication the Autowatch Ghost II Immobiliser has been adapted and tested for every vehicle we list as compatible. If we list your vehicle you can be sure we have thoroughly tested its operation with the Autowatch Ghost II Immobiliser.
If the PIN code is forgotten, the car is sold, or a button is broken there is a secure, unique reset code for each device.
Service mode allows your vehicle to temporarily start and drive without requiring the PIN code. The Auto watch Ghost II Immobiliser will exit service mode based on speed and time or by simply entering the PIN code.
At any time, you can easily change the PIN code. Only you will know the unique PIN code for your vehicle.
The Autowatch Ghost II Immobiliser is sealed and so small it can be installed and wrapped into the vehicle harness anywhere in the vehicle making it near impossible for a thief to find.
Uses the vehicle’s original buttons to enter the PIN code. The buttons in modern vehicles send data all around the vehicle which allows us to detect many different keys being pressed without extra wiring.
So you’re interested in getting some additional security in your vehicle, and you’ve decided to go for the Ghost Immobiliser, so what’s the next step
For those scanning their aftermarket vehicle security options, it is important to have an understanding of which option would be best suited for you. In
As a trusted supplier of vehicle security solutions, we at Car Specialist Customs are often asked about which is the best anti-theft device for cars.
The ghost immobiliser is supplied and fitted for £500. This is a set price for all make and models the ghost covers.
The Ghost Immobiliser can be fitted to almost all vehicles. The Ghost Immobiliser utilises the CAN Networks which is common in almost all modern vehicle. For any information regarding compatibility do not hesitate to contact our expect installers.
The Ghost is one of the most secure security systems on the market. The Ghost immobiliser communicates with your vehicle’s ECU unit via the CAN Network, this allow it to operate in total silence without giving away its location. Key cloning, and ECU swapping is almost pointless as adding a new key or replacing the ECU to steal your vehicle will not work as only the correct personal code will allow your car to be started.
The installation of the Autowatch Ghost Immobiliser normally takes around an hour, once fitted we give a full demonstration of how to use it correctly. This normally takes around 15-20 minutes.
The Autowatch Ghost Immobiliser 2 is fully transferable between one vehicle and another at any given time. We can remove and reinstall the ghost as and when you need. Please contact us for the cost and process involved if needed.
No, the Ghost Immobiliser does not affect your vehicle manufactures warranty at all. However we always recommend checking with your local dealership for your own peace of mind.
Unfortunately cars with keyless entry are vulnerable to being stolen in under 60 seconds. Keyless car theft is the most common way cars are stolen, thieves do this by using keyless cloning and relay methods. This is done by picking up the transmission of your original key and replicating it to gain access to your car.
The Ghost Immobiliser eliminates this as an option, as even with the key present unless you know the unique pin code, the vehicle will not move or start.
Since March 2020, The Autowatch Ghost Immobiliser is TASSA approved and recognised by come insurers. Most insurers are adding the Autowatch Ghost 2 to their lists regularly so it is always best to contact them to verify the matter.
We are always happy to answer any queries or issues over the phone or by text. We offer continuous help and support to you and no question is too small.
The ghost has a safety net in the form of a unique 4 digit code that allows you to promptly reprogram the Ghost to another pin and get the car started. Upon Handover we always show you how to input the 4 digit code if you ever happen to forget the code. Alternatively if your struggling, give us a call and we can talk you threw this over the phone
The Ghost Immobiliser pin sequence can be amended at any time with ease. We run threw this with you at your handover to ensure you are fully capable of doing so if needed. Alternatively instruction are on the back of your ghost card and we are also always happy to assist you over the phone if needed.
Read our blog on how to remove a Ghost Immobiliser